Produttori

Information

PAGAMENTI RATEALI CON SOISY

Newsletter

PARASOUND HALO INTEGRATED Silver aperto mai usato

Nuovo prodotto

AMPLIFICATORE STEREO INTEGRATO

Maggiori dettagli

1 Articolo

Disponibile pronta consegna

Attenzione: Ultimi articoli in magazzino!

1 999,00 € tasse incl.

CARTE ACCETTATE
CARTE ACCETTATE

Dettagli

 DA ESPOSIZIONE NEGOZIO

Preamp and DAC Features

  • Latest generation ESS Sabre32 Reference DAC (ES9018K2M)
  • Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
  • USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
  • Windows USB drivers for ASIO & WASAPI - Download here
  • Mac OS does not require any drivers
  • Coax and optical accept PCM up to 192kHz/24-bit
  • Analog bass management with high & low pass crossovers
  • Home theater bypass input for surround sound integration
  • Front panel subwoofer level control
  • Dedicated high current headphone amplifier (TI TPA6120)
  • Phono for MM & MC with 100 Ω or 47k Ω load
  • Front panel Aux input with automatic +12 dB gain stage
  • 5 pairs RCA line level Analog inputs
  • 1 pair XLR balanced Analog input
  • Balanced XLR and RCA left and right preamp outputs
  • 1 balanced XLR and 2 RCA subwoofer outputs
  • Bass & treble controls with relay bypass from remote or front panel
  • Rear panel IR input and IR loop output jacks
  • 12 Volt input and output to triggers
  • Back-lit remote control with discrete buttons
  • 0.5w standby power consumption meets Energy Star & EU specs

Power Amp Features

  • 160 Watts x 2 @ 8 Ohms (RMS, both channels driven)
  • 240 Watts x 2 @ 4 Ohms (RMS, both channels driven)
  • Power amp circuit topology designed by legendary John Curl
  • Direct amplifier input to bypass preamp section
  • High bias class A/AB operation
  • Oversized shielded toroid power transformer
  • Dual-mono power supply and power amplifier
  • 40,000uF power supply filter capacitance
  • Matched JFET input stages and MOSFET driver stages
  • 12 high voltage/high current bipolar output transistors
  • Heavy-duty 24k gold-plated 5-way speaker binding posts
  • Over temp and short circuit relay protection

Power Output - Both channels driven
(0.05% THD, RMS, 20 Hz - 20 kHz)
160 watts x 2 @ 8 Ω
240 watts x 2 @ 4 Ω

Power Output - Both channels driven
(0.9% THD, RMS, 20 Hz - 20 kHz)
180 watts x 2 @ 8 Ω
270 watts x 2 @ 4 Ω

Current Capacity
45 amps peak per channel

Frequency Response
10 Hz - 100 kHz, +0/-3 dB

Total Harmonic Distortion (THD)
< 0.01 %, average listening levels
< 0.05 %, 160 watts x 2 @ 8 Ω

Interchannel Crosstalk
> 50 dB at 20 kHz
> 70 dB at 1 kHz

Signal to Noise Ratio - IHF A-weighted
Line in: - 103 dB (input shorted)
Digital in: - 106 dB

Amplifier Damping Factor
> 800 at 20 Hz

Preamp Stage Input Sensitivity
300 mV in for 1 V at Pre Out jacks
Total Preamp Stage Gain: 10 dB
Max Output Unbalanced: 7 V
Max Output Balanced: 9 V

Power Amplifier Stage Sensitivity
1 V at Bypass/Amp In for 28 V at Speaker Out
Total Amp Stage Gain: 28 dB

Phono Stage Sensitivity / Input Impedance
    Input Impedance
MM: 35 dB / 47 k Ω
MC: 52 dB / 47 k Ω or 100 Ω
    Input Capacitance
150 pF

High & Low Pass Crossover Slopes
12 dB per octave

Supported DAC Sampling Rates
USB: up to 384 kHz / 32-bit PCM
DSD Native: DSD 64, DSD 128, DSD 256
DSD over PCM (DoP) at 384 kHz
Coax/Opt: up to 192 kHz / 24-bit PCM

Digital to Analog Converter
ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit

USB 2.0 Controller
VIA VT1731, 384 kHz / 32-bit

Headphone Amplifier
Texas Instruments TPA6120A
Output Impedance 10 ohms

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Input Impedance
Unbalanced: 24 k Ω
Balanced: 100 k Ω per leg

Output Impedance
Unbalanced: 100 Ω
Balanced: 470 Ω per leg

Dimensions
Width: 17-1/4" (437 mm)
Depth: 16-1/4" (413 mm)
Depth, with cables 17-1/4" (437 mm)
Height, with feet: 5-7/8" (150 mm)
Height, without feet: 5-1/4" (133 mm), 3U

Net Weight
33 lb. (15 kg)

Shipping Weight
45 lb. (20.4 kg)

Power Requirement
Standby: 0.5 watts
Idling power: 70 watts
Maximum: 750 watts
110-125 VAC 60 Hz or 220-250 VAC 50 Hz
AC mains voltage is set on rear

Recensioni

Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

PARASOUND HALO INTEGRATED Silver aperto mai usato

PARASOUND HALO INTEGRATED Silver aperto mai usato

AMPLIFICATORE STEREO INTEGRATO

30 altri prodotti della stessa categoria: